1946 Oliver HG42 Dozer

Forum for the discussion of Cletrac related topics.

1946 Oliver HG42 Dozer

Postby Buffaloman » Tue Dec 13, 2016 3:13 pm

I am considering purchasing a 1946 HG 42 Barn Queen. It reportedly has been been stored for over 40 years.
00303_bWNzfQmpkEf_600x450.jpg


I am considering using it for 1) clearing brush and some grading of pasture and 2) farming. The machine has a rear 540 RPM PTO. The owner doesn't know about any auxiliary transmission. He says he had used it to push dirt.

How was the crawler used for ag work? Does it have or was there a way to install a 3 point to lift a plow , etc. like a normal tractor?

It it can't lift, what implements were used? How could the crawler cross a road, go over a culvert, etc. if it was dragging a plow or cultivator?

If the crawler doesn't have an auxiliary tyranny people report it can't be slowed down to grade. Can someone post a picture of an auxiliary tranny or describe what to look for?

If it can't lift an implement how can I move the implements around conveniently without a tractor and the crawler?

I am very confused. I don't want to buy a barn queen. I don't know about these machines.

Thanks
Attachments
00i0i_1C6Q02m3Tzw_600x450.jpg
Buffaloman
 
Posts: 1
Joined: Tue Dec 13, 2016 2:24 pm

Re: 1946 Oliver HG42 Dozer

Postby Terry » Thu Jan 05, 2017 4:00 pm

Most of the crawler tractors did not have a 3 point hitch system. They used the same pull type implements as other tractors of the period. Plows were pull type, either hydraulic lift or ground driven trip type. It would be more difficult to do fine grading work without an auxillary slow speed transmission, but I don't recall seeing one factory fitted on the hg series, might be wrong.
Terry
 
Posts: 145
Joined: Tue Nov 26, 2002 6:55 pm
Location: Abingdon, IL

Re: 1946 Oliver HG42 Dozer

Postby 560Dennis » Tue Feb 21, 2017 10:51 am

We had a hg 46 with ware loader . It does not hae the power to clear brush .sorry but that a fact. I would reccommend something over 40 hp and do it in string and fall ,good luck
560Dennis
 
Posts: 26
Joined: Mon May 05, 2014 9:31 pm
Location: NE Ohio


Return to Cletrac Forum

Who is online

Users browsing this forum: No registered users and 2 guests