White 2-105

A forum for the discussion of White tractors and farm machinery.

White 2-105

Postby ankenymatt » Sat May 05, 2012 9:17 am

Need some help on how to take out the priority valve plug on my pressure valve. Does it screw out? Or is it just pressed in and the oring are making it stick?

Im still fighting my hyd system. After raising any implement, we cant lower untill it feels like letting you or you lower the 3 point a bit then it seems to lower. Fluid levels are good and filters are new. I was going to try and clean and inspect springs, seats and replace orings on the pressure valve and see if one was sticking causing it not release when wanting to drop the planter.
Posts: 19
Joined: Fri Oct 27, 2006 11:30 am

Postby buffalos » Sat May 05, 2012 8:28 pm

Did you check your hdy couplers, they can give you the prouplems your having
Posts: 18
Joined: Tue Jul 14, 2009 2:46 pm

Postby Sean D » Sat Nov 08, 2014 12:00 pm

What did you find out??? Have an 1850 with an similar issue. Lift arms stay up, can hear the relief valve blowing. My next step is to check the char Lynn unit to see if someone swapped a closed center unit for the open center it is suppose to have.
Sean D
Posts: 15
Joined: Tue Jun 24, 2014 1:29 pm

Return to White Forum

Who is online

Users browsing this forum: No registered users and 1 guest