oliver 62t baler

Forum for the discussion of Oliver related topics.

oliver 62t baler

Postby builder2765 » Mon Nov 28, 2016 1:52 pm

recently bought a 62t baler...I keep breaking the shear bolt at the pto...plunger keeps hitting the plunger stop...I realize it's supposed to do this...although I can't seem to adjust the timing for this operation...any help would be appreciated...also...are there any outlets for parts for this thing...I know its old...although has been stored inside for awhile...a long while...everythin look pretty good on it...just rusty and a little 'loose'...especially the chains...I am a virtual novice with this hay stuff...any help would be appreciated...thanx, scott
builder2765
 
Posts: 1
Joined: Mon Nov 28, 2016 1:41 pm

Re: oliver 62t baler

Postby 560Dennis » Tue Feb 21, 2017 10:25 am

Well I would guess that there is a another problem with a key and shaft , or in a gear box a such as a roller n a gear . I would try to select as many inpendent units as possible and turn them to see if free then re time in a procees of elimination. Somthing binding up ,got to find it. Good luck
560Dennis
 
Posts: 26
Joined: Mon May 05, 2014 9:31 pm
Location: NE Ohio


Return to Oliver Forum

Who is online

Users browsing this forum: Google [Bot] and 1 guest

cron