70 shift lever

Forum for the discussion of Oliver related topics.

70 shift lever

Postby kenbect » Mon Apr 18, 2016 6:36 pm

I am working on a 1940 70 and have noticed that when I try to put it into 5th gear, the shift lever will hit the dash before engaging all the way. Is there a remedy for this. Is it normal to have that much travel?
kenbect
 
Posts: 6
Joined: Fri Jun 26, 2009 4:07 pm

Postby Peugeot rider » Fri May 06, 2016 10:45 pm

You could hava a bent lever or the slots on the rails are worn badly or the end of the shift lever is worn; or it could be a loose or worn fork. There is a lot to check. They do come real close to the deash when everything is tight. I put a toggle switch in for my ignition for that reason. I was pulling a load of corn up a hill and had to shift down to 5th gear; and as I did I hit the ignition switch and shut it off. Luckly my reflexes were better then and I got it turned back on befor the moter stopped.
Gary
GL
Peugeot rider
 
Posts: 22
Joined: Tue Jan 19, 2010 8:28 pm


Return to Oliver Forum

Who is online

Users browsing this forum: No registered users and 2 guests

cron